Skip to Content

How to Connect Steering Wheel Controls to Pioneer Stereo?

If you’re looking to add steering wheel controls to your Pioneer stereo, there’s good and bad news. Unfortunately, the bad news is that not all Pioneer stereos are equipped to be connected to steering wheel controls.

The good news is that if your Pioneer stereo is equipped with the proper connections, it’s a relatively simple process to get everything set up and working correctly.

So, how to connect Pioneer stereo to steering wheel controls? Let’s find out.

Connecting Pioneer car radio with the steering wheel controls requires the following steps:

#1. First, you need to check if your Pioneer stereo is equipped with the proper connections for steering wheel controls. If not, you’ll need to purchase an adapter that will allow you to connect the two.

#2. Once you have the proper adapter, you’ll need to connect it to the back of the pioneer stereo.

#3. Next, connect the other end of the adapter to the steering wheel control unit.

#4. Now, you need to program the adapter to recognise the pioneer stereo. This is usually done by following a series of simple instructions which come with the adapter.

#5. Once the adapter is programmed, you should be all set! Make sure to test everything before hitting the road.

As an Amazon Associate, ImproveCarAudio will receive a small commission from qualifying purchases made through the links in this article.

Tip: Connecting Pioneer car radio to the steering wheel controls requires two main things: an interface and, for some stereos also adapter (link to Amazon).

The interface is the part that connects to the stereo, while the adapter is what allows the interface to connect to the Pioneer stereo.

You’ll need to connect the interface to the steering wheel control first, then connect the adapter to the interface, and finally plug the adapter into the Pioneer stereo.

In the article below, I will go into more detail about the specific products you’ll need to connect your Pioneer stereo to your steering wheel controls and the step-by-step process for getting everything set up and working correctly.

How Do Steering Wheel Radio Controls Work?

Steering wheel radio controls are a great way to control your car stereo without taking your hands off the wheel. But how do they work?

Steering wheel radio controls work by sending signals from the buttons on the steering wheel to the stereo that allows you to focus on the road without having to take your hands off the wheel.

For example, if you press the “seek” button on your steering wheel, the receiver will send a signal to the stereo telling it to change the station.

Similarly, if you press the “volume up” button, the receiver will send a signal to turn up the volume.

A few different types of interfaces can be used to connect Pioneer stereo to steering wheel controls, but the most popular is the PAC SWI-RC (link to Amazon).

PAC RP5-GM11 Radio Replacement Interface With Built-In OnStar Retention/Steering Wheel Control Retention/Navigation Outputs for Select GM Class II Vehicles

The PAC SWI-RC is an interface that connects directly to the Pioneer stereo and allows you to control it with steering wheel controls. It’s a relatively straightforward install and only requires a few wires to be connected.

Why Should You Connect Your Steering Wheel Controls to a Pioneer Stereo?

There are a few reasons why you might want to connect your steering wheel controls to a pioneer stereo.

  • The first reason is safety. Having steering wheel controls allows you to control your stereo without taking your hands off the wheel, which can help if you’re trying to focus on the road.
  • Another reason is convenience. Steering wheel controls allow you to change the volume, skip tracks, and even answer phone calls without taking your hands off the wheel.
  • Finally, steering wheel controls can also help you avoid wear and tear on your pioneer stereo. If you’re constantly taking your hands off the wheel to change the volume or skip tracks, you’re eventually going to damage the buttons on your stereo. But if you have steering wheel controls, you can avoid all that wear and tear.

How to Connect Steering Wheel Controls to Pioneer Stereo?

Now that we’ve gone over why you might want to connect your steering wheel controls to your pioneer stereo let’s talk about how to do it.

Metra Axxess ASWC-1 Steering Wheel Control Interface

As I mentioned earlier, you’ll need two main things to connect your Pioneer stereo to your steering wheel controls: an interface and an adapter.

To connect the Pioneer stereo to the steering wheel controls, follow the steps below:

#1. Start by disconnecting the negative battery terminal to avoid any accidents.

#2. Next, locate the pioneer stereo in your dash and remove it from the dash.

#3. Once the pioneer stereo is removed from the dash, you’ll need to locate the wires that connect it to the vehicle. These are usually located behind the pioneer stereo.

#4. Locate the interface with your steering wheel control kit and plug it into the pioneer stereo.

#5. Take the adapter with your steering wheel control kit and plug it into the interface.

#6. Finally, reconnect the negative battery terminal and test out your new steering wheel controls!

And that’s it! Once you’ve done all of that, you should connect your pioneer stereo to the steering wheel controls and be ready to go.

If you’re having trouble getting everything set up, there are a few things you can try.

  • First, make sure that all of the connections are tight and secure. Loose connections can sometimes cause problems.
  • Another thing you can try is resetting your pioneer stereo. To do this, unplug the stereo from the adapter and then plug it back in again. This will often fix other issues.
  • Finally, if you’re still having trouble, you can try contacting Pioneer customer service. They should be able to help you troubleshoot the issue and get everything up and running.

The Benefits of Having Steering Wheel Controls in Your Car

There are many benefits of having steering wheel controls in your car.

  • The most apparent benefit is safety. When you have steering wheel controls, you can keep your hands on the wheel and your eyes on the road, which is a great way to avoid accidents.
  • Another benefit of steering wheel controls is convenience. You can change the music, answer phone calls, and adjust the volume without ever taking your hands off the wheel with steering wheel controls. This can be a massive help if you’re trying to multi-task while driving.
  • Finally, steering wheel controls can also help you avoid wear and tear on your Pioneer stereo. If you’re constantly taking your hands off the wheel to change the volume or skip tracks, you’re eventually going to damage the buttons on your stereo.

But if you have steering wheel controls, you can avoid all that wear and tear.

Now that we’ve gone over the benefits of having steering wheel controls let’s talk about how to connect them to your Pioneer stereo.

How Do I Get My Steering Wheel Controls to Work With Any Aftermarket Stereo?

There are a few different ways to do this, but the most common way is to use an adapter.

Bewinner Wireless Universal Remote Control Infrared Car Steering Wheel CD DVD MP3 Remote Control for Controlling Various Types of Car CD/VCD/DVD or Ot

An adapter will allow you to keep your factory steering wheel controls and use them with your aftermarket stereo.

The first thing you’ll need to do is purchase an adapter compatible with your vehicle.

Once you have the adapter, follow the instructions that come with it to wire it into your stereo.

And that’s it! Once the adapter is wired in, your steering wheel controls should work just like they did with your factory stereo.

How Do I Connect Steering Wheel Remotes to the Pioneer Car Stereo?

Pioneer offers a few different models of car stereos that are compatible with steering wheel remotes.

If you have a Pioneer car stereo that is compatible with steering wheel remotes, the first thing you’ll need to do is purchase a remote control. The most popular remote for the steering wheel is the pioneer CD-SR100 (link to Amazon).

Once you have the remote control, follow the instructions that come with it to wire it into your stereo.

And that’s it! Once the remote is wired in, your steering wheel controls should work just like they did with your factory stereo.

Which Pioneer Car Stereo Can I Connect to the Steering Wheel Interface?

Simply having a Pioneer stereo is not the answer to successful connectivity.

Although all Double-DIN units can be connected to the steering wheel controls, it is not the same for Single-DIN units.

If you have a model in the 700 series or higher, you are in luck because all models in the 700, 800 and 900 series have the steering wheel function and do not require an interface to be installed.

For example, if you have a DEH2750-MP, DEH2850-MP or the DEH2950-MP, your connection will work. The same goes with the MVH and AVH models, but if you have the 600 series, unfortunately, you cannot make the connection work.

You can identify your series by looking at the second number of your model name.

Conclusion

As you can see, there are a few different ways to connect your steering wheel controls to your Pioneer stereo if it is not equipped with such a connection in the first place.

The most important thing is to make sure you have a suitable adapter for your vehicle.

Once you have the adapter, follow the instructions that come with it to wire it into your stereo.